atf 70 g telecrane

I recently designed and built my own fully functional ATF 70 G mobile crane! After months of meticulously drawing and modeling, everything finally came together. Every detail, from the mast to the intricate hydraulic components, was carefully crafted by me.

The result is stunning. The crane is fully operational, with all the lights and options working exactly as expected. The lights come on just like they would on a real crane, and even the signal lighting works perfectly. Every moving part, from the telescopic mast to the hoisting system, is fully automated and can be controlled with a realistic remote.

What's even more remarkable about this project is that the model can also be 3D printed. The design has been precisely adjusted for 3D printing, although it's not the cheapest model to build. For example, the axles are quite complex and cost more than 200 euros each – and you need four of them. There's also the hydraulic system, which isn't cheap either, costing around 300 euros on its own.

Then, there's the control system. I chose the FlySky 18ch PL18EV transmitter, which offers incredible functionality, especially for this crane model. This transmitter allows for quick switching between the undercarriage and the superstructure (the crane's base and the rotating upper part). This functionality is crucial for smooth operation, as it lets you easily switch between driving and crane control. While other transmitters could work, they wouldn’t offer the same efficiency in switching between these two parts, which could hinder the experience.

The most exciting moment was when I powered up the crane for the first time and all the lights illuminated. It felt like I had a fully functional mobile crane in my hands. Every feature, from the extending mast to the safety signals, works exactly as it should. It's a project I'm incredibly proud of – even with the costs involved!

Included in the Project:

Detailed Build Instructions: Step-by-step guidance on how to construct the model, from assembling the chassis to setting up the hydraulic system and electronics.

Complete Parts List: A comprehensive list of all necessary components, including 3D-printed parts, hydraulic elements, axles, and electronics, with direct links to purchase each item.

Whether you’re an experienced builder or someone just stepping into the world of scale models, these resources will ensure that you can follow along and recreate this remarkable project!

If you have any questions, feel free to send me an email at [email protected] or message me on Facebook.

To build this model, you'll need a large 3D printer like the Creality CR-6 Max or Ender 5 Plus. It can get quite expensive—each axle costs over 200 euros, and you'll need four. There's also the hydraulic system (around 300 euros), plus two receivers, a few speed controllers, a transfer case, gearbox, motor for the winch, and stabilizer cylinders. You also have the option to add full lighting. All these extras make the project pricey, but it results in a fully functional and detailed crane model!