RC Sportster Airplane by HOLOMODELS RC. NO INFILL OR TRAVEL MOVES!! 3MF's and G-Codes!

There is a complete different set of G-Codes and PrusaSlicer 3MF Profiles available as a separate on the main page.

I hope that solves the issue your having!

Thanks, Turned out it was a AMS issue, had to run the filament straight into the machine, First print underway and looking forward to the rest

Excellent, Glad to hear it! If you use ASA for the motor mount (which I recommend), and your printer is capable of printing at a higher temp, tune your bed temp to 90 and the nozzle to 256-280. I made the G-Codes so they would print on any machine, however the ASA has a hard time sticking to the bed at a lower temp. Just FYI, you would have to use hairspray or something. Probably will just change the G-Code in the future so I don't have to tell everyone this.

Hey Mark! Sorry to hear that. Glad to hear you like the design, it really is a great flying airplane. I think you'll like the new version compared to the old one. Thank you for the positive comments. Yes, I am still deg and building. I have been getting ready for Flight Fest 2025, so I made two foamies. I am about a week or so away from posting my next design here on Cults!! Can't wait, it's been in the design phase for almost two years now (off and on), and I have a good amount of time invested in it. I won't comment what it is yet, but it's definitely a show stopper and is going to be the center of attention everywhere it's taken. That's guaranteed! I took two of them to flight fest last year and had people following me around and asking questions about it. It's something completely different than anyone has posted here on Cults. I'm very excited to release it, been working hard to get it where I want it. It's a park flyer with a mid-mounted motor and thrust vectoring like the old RC-Powers and FRC Foamies airplanes.

Thanks for your comment. Can't wait to see and hear what you think about the updated Sportster.

I have been holding off on making more videos until my new camera gets here early this week. Can't wait!

HI Bill, Glad to see you keep improving on an already excellent design. I flew my sportster and it flew beautifully, I managed to land several times without hurting the landing gear, I guess my skill are improving. I should the new version and give it a try. Thanks

Thanks, and good, I am glad to hear that. Yes, definitely the newest version. Especially if you plan on re-printing this plane in the future. Like I said this is my favorite 3D printed plane, so If I can make it better in any way I probably will. The "Gear" is just barely thicker, but I did add another "Thicker Gear" for those of you who are interested in it. This airplane really does fly GREAT!

Thank you so much for your comment, and your appreciation of my work. It's comments like yours that make all the time I spent on it well worth it. And yes, it is definitely nicer than my A-4, even I can it that. The A-4 was my first RC project, where this is now my 5th. I wanted it to be quick to print and easy to put together. Let me know if you have any questions or problems. I will do my best to address them in a timely fashion. I would appreciate if you would post some pictures in the makes section. Are you slicing the files yourself or printing it using my G-Codes?