Skip to content

AEPWAR19 - Buck Sargent Trenches

AEPWAR19-Cover.jpg AEPWAR19 - Buck Sargent Trenches
1.jpg AEPWAR19 - Buck Sargent Trenches
2.jpg AEPWAR19 - Buck Sargent Trenches
3.jpg AEPWAR19 - Buck Sargent Trenches
4.jpg AEPWAR19 - Buck Sargent Trenches
5.jpg AEPWAR19 - Buck Sargent Trenches
6.jpg AEPWAR19 - Buck Sargent Trenches
7.jpg AEPWAR19 - Buck Sargent Trenches
8.jpg AEPWAR19 - Buck Sargent Trenches
9.jpg AEPWAR19 - Buck Sargent Trenches
10.jpg AEPWAR19 - Buck Sargent Trenches
Dragonbite.jpg AEPWAR19 - Buck Sargent Trenches
openlock.png AEPWAR19 - Buck Sargent Trenches
Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5/5 (1 vote)
Evaluation of on the printability, utility, level of detail, etc.
License
Usages
3D design format
1 file (ZIP) Close
  • AEPWAR19-Buck Sargent Trenches-03302025.zip
    • AEPWAR19 Ree.pdf
    • Dragonbite/AEPWAR19 - DB2x2 Blasted Crater.stl
    • Dragonbite/AEPWAR19 - DB2x2 Blasted Ground.stl
    • Dragonbite/AEPWAR19 - DB2x2 Dirt Grass Humps.stl
    • Dragonbite/AEPWAR19 - DB2x2 Hillside Crater 1.stl
    • Dragonbite/AEPWAR19 - DB2x2 Hillside Crater 2.stl
    • Dragonbite/AEPWAR19 - DB2x2 Minefield 1 v2.stl
    • Dragonbite/AEPWAR19 - DB2x2 Minefield 2.stl
    • Dragonbite/AEPWAR19 - DB2x2 Minefield 3.stl
    • Dragonbite/AEPWAR19 - DB2x2 Minefield 4.stl
    • Dragonbite/AEPWAR19 - DB2x4 Communication Trench End Up.stl
    • Dragonbite/AEPWAR19 - DB2x4 Communication Trench Hill.stl
    • Dragonbite/AEPWAR19 - DB2x4 Dugout Stairs.stl
    • Dragonbite/AEPWAR19 - DB4x4 Collapsed Dugout Roof.stl
    • Dragonbite/AEPWAR19 - DB4x4 Deep Crater.stl
    • Dragonbite/AEPWAR19 - DB4x4 Dugout with Hole.stl
    • Dragonbite/AEPWAR19 - DB4x4 Minefield 1.stl
    • Dragonbite/AEPWAR19 - DB4x4 Minefield 2.stl
    • Dragonbite/AEPWAR19 - DB4x4 Trench End Up 1.stl
    • Dragonbite/AEPWAR19 - DB4x4 Trench End Up 2.stl
    • Dragonbite/AEPWAR19 - DB4x4 Trench Straight 1 (Transition).stl
    • Dragonbite/AEPWAR19 - DB4x4 Trench Straight 2 ( Walls).stl
    • Dragonbite/AEPWAR19 - DB4x4 Trench Straight 3 (Empty Sidepit).stl
    • Dragonbite/AEPWAR19 - DB4x4 Trench Straight 4 (Debris Sidepit).stl
    • Dragonbite/AEPWAR19 - DB4x4 Trench Straight Hill 1.stl
    • Dragonbite/AEPWAR19 - DB4x4 Trench Straight Hill 2.stl
    • OpenLOCK/AEPWAR19 - OL2x2 Blasted Crater.stl
    • OpenLOCK/AEPWAR19 - OL2x2 Blasted Ground.stl
    • OpenLOCK/AEPWAR19 - OL2x2 Dirt Grass Humps.stl
    • OpenLOCK/AEPWAR19 - OL2x2 Hillside Crater 1.stl
    • OpenLOCK/AEPWAR19 - OL2x2 Hillside Crater 2.stl
    • OpenLOCK/AEPWAR19 - OL2x2 Minefield 1.stl
    • OpenLOCK/AEPWAR19 - OL2x2 Minefield 2.stl
    • OpenLOCK/AEPWAR19 - OL2x2 Minefield 3.stl
    • OpenLOCK/AEPWAR19 - OL2x2 Minefield 4.stl
    • OpenLOCK/AEPWAR19 - OL2x4 Communication Trench End Up.stl
    • OpenLOCK/AEPWAR19 - OL2x4 Communication Trench Hill.stl
    • OpenLOCK/AEPWAR19 - OL2x4 Dugout Stairs.stl
    • OpenLOCK/AEPWAR19 - OL4x4 Collapsed Dugout Roof.stl
    • OpenLOCK/AEPWAR19 - OL4x4 Deep Crater.stl
    • OpenLOCK/AEPWAR19 - OL4x4 Dugout with Hole.stl
    • OpenLOCK/AEPWAR19 - OL4x4 Minefield 1.stl
    • OpenLOCK/AEPWAR19 - OL4x4 Minefield 2.stl
    • OpenLOCK/AEPWAR19 - OL4x4 Trench End Up 1.stl
    • OpenLOCK/AEPWAR19 - OL4x4 Trench End Up 2.stl
    • OpenLOCK/AEPWAR19 - OL4x4 Trench Straight 1 (Transition).stl
    • OpenLOCK/AEPWAR19 - OL4x4 Trench Straight 2 ( Walls).stl
    • OpenLOCK/AEPWAR19 - OL4x4 Trench Straight 3 (Empty Sidepit).stl
    • OpenLOCK/AEPWAR19 - OL4x4 Trench Straight 4 (Debris Sidepit).stl
    • OpenLOCK/AEPWAR19 - OL4x4 Trench Straight Hill 1.stl
    • OpenLOCK/AEPWAR19 - OL4x4 Trench Straight Hill 2.stl

Learn more about the formats
Publication date 2025-04-08 at 03:45
Design number 2886504
AetherStudios

AetherStudios

Issue with this design? Report a problem.

3D printer file info

3D model description

The War series of terrain was created by Colin Christenson. War Trenches is based on our 2nd published set, Peaceful Gardens, but diverges greatly from the unspoiled grounds. This set works and integrates completely with the entire Peaceful series of terrain, but this one is focused on the battlefields, of combat and tight trenches. This one is focused on War.

This set is a mirror set of AEPWAR02, but filled with war debris and a few new special tiles we made along the way. When Roby came on to our team at the start of the year, I told him his great work would be a full “remix rework” of the AEPWAR series. This is the third victory in that quest.

3D printing settings

TERRAIN RECOMMENDED PRINT SETTINGS

Layer Size​: 0.15mm minimum. 0.1mm recommended.
Infill​: 10% for all models recommended
Top/Bottom Layers​: 9 (or 0.9mm if using a different layer size than 0.1mm)
Side Shell Count​: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
Raft/Brim/s​: None

Categories

RPG tabletop

Tags

Advertising

Would you like to Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 4 people, therefore it is very simple to us to maintain the activity and create future developments. Here are 3 solutions accessible to all:

  • ADVERTISING: Disable your ad blocker.
  • DONATE: Make a donation via Ko-Fi 💜.
  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and ing on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not able to any investor or brand. Almost all of the site’s revenues are paid back to the platform’s makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.