Skip to content

Crawler P12 TRX6 Cab - 1/10 RC body

Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5/5 (2 votes)
Evaluation of on the printability, utility, level of detail, etc.
License
Usages
3D design format
1 file (ZIP) Close
  • ahead RC P12 TRX6 Cab.zip
    • interior/brake pedal.stl
    • interior/dashboard.stl
    • interior/firewall mount L.stl
    • interior/firewall mount R.stl
    • interior/firewall.stl
    • interior/foort rest.stl
    • interior/interior floor.stl
    • interior/seat base 1 flat cushion.stl
    • interior/seat base 2.stl
    • interior/seat brace 1.stl
    • interior/seat brace 2.stl
    • interior/seat brace 3.stl
    • interior/seat brace 4.stl
    • interior/seat bracket 1.stl
    • interior/seat bracket 2.stl
    • interior/seat bracket 3.stl
    • interior/seat bracket 4.stl
    • interior/seat rest 1.stl
    • interior/seat rest 2.stl
    • interior/steering column extension.stl
    • interior/steering column.stl
    • interior/steering mount.stl
    • interior/steering wheel.stl
    • interior/throttle pedal.stl
    • mirror/mirror L.stl
    • mirror/mirror pole L.stl
    • mirror/mirror pole mount L.stl
    • mirror/mirror pole mount R.stl
    • mirror/mirror pole R.stl
    • mirror/mirror R.stl
    • mirror/mirror strut L.stl
    • mirror/mirror strut R.stl
    • mount/cab mount L.stl
    • mount/cab mount R.stl
    • mount/fuel tank cap L.stl
    • mount/fuel tank cap R.stl
    • mount/fuel tank L.stl
    • mount/fuel tank R.stl
    • mount/TRX6 mount L.stl
    • mount/TRX6 mount R.stl
    • shock mount/middle shock mount center.stl
    • shock mount/middle shock mount L.stl
    • shock mount/middle shock mount R.stl
    • shock mount/rear shock mount center.stl
    • shock mount/rear shock mount L.stl
    • shock mount/rear shock mount R.stl
    • ahead RC P12 Cab.pdf
    • accessories/handle 1.stl
    • accessories/handle 2.stl
    • accessories/ladder L.stl
    • accessories/ladder R.stl
    • accessories/visor big.stl
    • accessories/visor small.stl
    • accessories/wiper L.stl
    • accessories/wiper R.stl
    • air filter/air filter mount L.stl
    • air filter/air filter mount R.stl
    • air filter/filter lower L.stl
    • air filter/filter lower R.stl
    • air filter/filter pipe extension L.stl
    • air filter/filter pipe extension R.stl
    • air filter/filter pipe L.stl
    • air filter/filter pipe R.stl
    • air filter/filter top L.stl
    • air filter/filter top R.stl
    • bonnet/bonnet handle 1.stl
    • bonnet/bonnet handle 2.stl
    • bonnet/bonnet handle 3.stl
    • bonnet/bonnet handle 4.stl
    • bonnet/bonnet handle 5.stl
    • bonnet/bonnet handle 6.stl
    • bonnet/bonnet handle 7.stl
    • bonnet/bonnet handle 8.stl
    • bonnet/bonnet hinge L1.stl
    • bonnet/bonnet hinge L2.stl
    • bonnet/bonnet hinge L3.stl
    • bonnet/bonnet hinge L4.stl
    • bonnet/bonnet hinge R1.stl
    • bonnet/bonnet hinge R3.stl
    • bonnet/bonnet hinge R4.stl
    • bonnet/bonnet L.stl
    • bonnet/bonnet middle.stl
    • bonnet/bonnet L.stl
    • bonnet/bonnet mount L.stl
    • bonnet/bonnet mount R.stl
    • bonnet/bonnet mount tab L.stl
    • bonnet/bonnet mount tab R.stl
    • bonnet/bonnet R.stl
    • bonnet/bonnet R.stl
    • bonnet/lower hinge R2.stl
    • bonnet/radiator grille.stl
    • bonnet/radiator mount.stl
    • bonnet/radiator.stl
    • bumper/bumper (type 1).stl
    • bumper/bumper (type 2).stl
    • bumper/bumper (type 3).stl
    • bumper/bumper (type 4).stl
    • bumper/bumper bar (for type 1 and 2).stl
    • bumper/bumper bar 1 (for type 5).stl
    • bumper/bumper bar 1 split 1 (for type 3 and 4).stl
    • bumper/bumper bar 1 split 2 (for type 3 and 4).stl
    • bumper/bumper bar 2 (for type 3 and 4).stl
    • bumper/bumper bar 2 (for type 5).stl
    • bumper/bumper bar 3 (for type 3 and 4).stl
    • bumper/bumper bar 3 (for type 5).stl
    • bumper/bumper bar mount (for type 1 and 2).stl
    • bumper/bumper bar mount (for type 3 and 4).stl
    • bumper/bumper mount (for all types).stl
    • bumper/bumper mount for type 5.stl
    • bumper/bumper step 1 (for type 2).stl
    • bumper/bumper step 1 (for type 4).stl
    • bumper/bumper step 2 (for type 2).stl
    • bumper/bumper step 2 (for type 4).stl
    • bumper/bumper type 5.stl
    • bumper/trx6 chassis bumper mount.stl
    • cab/base er.stl
    • cab/base split 1.stl
    • cab/base split 2.stl
    • cab/base.stl
    • cab/cab.stl
    • cab/roof.stl
    • door/door handle L.stl
    • door/door handle R.stl
    • door/door hinge L1 high.stl
    • door/door hinge L1 low.stl
    • door/door hinge L2 high.stl
    • door/door hinge L2 low.stl
    • door/door hinge R1 high.stl
    • door/door hinge R1 low.stl
    • door/door hinge R2 high.stl
    • door/door hinge R2 low.stl
    • door/door L.stl
    • door/door L.stl
    • door/door R.stl
    • door/door R.stl
    • DXF/door L window.dxf
    • DXF/door R window.dxf
    • DXF/rear window.dxf
    • DXF/windshield.dxf
    • exhaust/exhasust R.stl
    • exhaust/exhaust L alt.stl
    • exhaust/exhaust L.stl
    • exhaust/exhaust low L.stl
    • exhaust/exhaust low R.stl
    • exhaust/exhaust R alt.stl
    • fender/fedner sidelight bucket R.stl
    • fender/fender headlight bucket 1.stl
    • fender/fender headlight bucket 2.stl
    • fender/fender headlight bucket 3.stl
    • fender/fender headlight bucket 4.stl
    • fender/fender headlight lens 1.stl
    • fender/fender headlight lens 2.stl
    • fender/fender headlight lens 3.stl
    • fender/fender headlight lens 4.stl
    • fender/fender L.stl
    • fender/fender mount L1.stl
    • fender/fender mount L2.stl
    • fender/fender mount R1.stl
    • fender/fender mount R2.stl
    • fender/fender R.stl
    • fender/fender sidelight bucket L.stl
    • fender/fender sidelight lens L.stl
    • fender/fender sidelight lens R.stl

Learn more about the formats
Publication date 2025-05-14 at 05:51
Design number 2983727
ahead_RC

ahead_RC

Certified
Issue with this design? Report a problem.

3D printer file info

3D model description

Requires a printer with minimum 256x256x160 build volume.

Please note the P12 logging bed and trailer shown in the images are SOLD SEPARATELY. This body is for the TRX6 - G63 version.

Please note all inner fenders need to be removed to use this body. Aftermarket front shock mounts are required.

There’s no doubt the P12 has achieved legendary status in its ability to haul extremely heavy loads. This experience can now be lived through in RC form, providing a new aspect to the world of crawling and hauling.

Being such a large truck by design, the ideal outermost tyre to tyre width is 265mm, and tyre height of 130mm is recommended. Using 130mm tyres would require purchasing additional Traxxas parts. More information below.

Body mounts for the TRX6 are included for easy mounting.

The battery is intended to be mounted at the front of the chassis rails where it is easiest to access. The bonnet top flaps are on hinges and can swing open, lower bonnet s are held on using magnets, giving you immediate access to the battery.

A fully detailed interior is included with this body, including dashboard, steering wheel, steering wheel column, pedals, seats, firewall and floor. The interior is also wrapped up in noise proof padding and quilting for a more unique and detailed touch.

There are 5 different types of front bumpers included with the body, ranging from the most bulky to a stubby and high clearance type.

Features and details included:
Highly detailed interior with floor
Interior door s
Radiator and grille
Bonnet can open, easy access to battery
Doors can open
Functioning headlight and sidelight buckets
5 different types of front bumpers
2 different styles of exhaust pipes
2 different styles of roof visor
Wipers
And more!

130mm tyre conversion:
Using 130mm tyres on the stock G63 will cause clearance issues with the middle and rear axle as the gap between the two tyres at 120mm are already very narrow. Therefore longer links are required for the rear axle.

The idea is to lengthen the rear links by 20mm so that it sets the rear axle further back by 20mm allowing more clearance between the middle and rear axle.

Parts list:
Traxxas 8145 (5x115 links with rod ends)
Traxxas 8839 (TRX-6 Ultimate RC Hauler 3XL 298mm T-Lock Cable Set)
Traxxas 8250 (TRX-6 driveshafts)

Assembly:
Use Traxxas 8145 as rear lower links, replacing the stock Traxxas 8831 rear lower links.
Use Traxxas 8831 as rear upper links, replacing the stock Traxxas 8832 rear upper links.
Replace stock rear diff lock cable and sleeve with Traxxas 8839.
Mix and match to extend driveshafts for the rear axle.

Printing notes:
Bumper types 1-4 are 270mm in length, but have been tested to fit on a 256x256 bed when rotated 45 degrees on the Z axis

Be sure to check out the instruction manual and gather all required hardware for assembly.

It is highly recommended to read the instruction manual before purchasing, to ensure you have all the required tools and hardware to assemble this body.

.DXF window outline files are included with this body.
Assembly instructions:
View the link below to the assembly instructions
https://www.aheadrc.com/manual

3D printing settings

FDM printing:
PLA+ or PETG filament
0.2-0.4mm layer heights
30-50% infill density
s are necessary

Categories

Construction toys

Tags

Advertising

Would you like to Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 4 people, therefore it is very simple to us to maintain the activity and create future developments. Here are 3 solutions accessible to all:

  • ADVERTISING: Disable your ad blocker.
  • DONATE: Make a donation via Ko-Fi 💜.
  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and ing on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not able to any investor or brand. Almost all of the site’s revenues are paid back to the platform’s makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.