Skip to content

Desk Drawer Organizer

1-ezgif.com-optimize.gif Desk Drawer Organizer
IMG_20240804_130827.jpg Desk Drawer Organizer
2-ezgif.com-optimize.gif Desk Drawer Organizer
IMG_20240804_132117.jpg Desk Drawer Organizer
IMG_20240804_134013.jpg Desk Drawer Organizer
IMG_20240804_130752.jpg Desk Drawer Organizer
IMG_20240804_132837.jpg Desk Drawer Organizer
IMG_20240804_134202.jpg Desk Drawer Organizer
IMG_20240804_133119.jpg Desk Drawer Organizer
IMG_20240804_134021.jpg Desk Drawer Organizer
IMG_20240804_134120.jpg Desk Drawer Organizer
IMG_20240804_134219.jpg Desk Drawer Organizer
20mm, side part.stl Desk Drawer Organizer
40mm, side part.stl Desk Drawer Organizer
50mm, side part.stl Desk Drawer Organizer
20mm.stl Desk Drawer Organizer
40mm.stl Desk Drawer Organizer
50mm.stl Desk Drawer Organizer
Advertising
€ 1.90+
Share
Add to
Make
Advertising
?
Creation quality: 3.8/5 (6 votes)
Evaluation of on the printability, utility, level of detail, etc.
License
Usages
3D design format
21 files (STL) Close
  • 105mm, side part.stl
  • 105mm.stl
  • 15mm, side part.stl
  • 15mm.stl
  • 20mm, side part.stl
  • 20mm.stl
  • 30mm, side part.stl
  • 30mm.stl
  • 40mm, side part.stl
  • 40mm.stl
  • 45mm, side part.stl
  • 45mm.stl
  • 50mm, side part.stl
  • 50mm.stl
  • 60mm, side part.stl
  • 60mm.stl
  • Connecting element.stl
  • Corner t, side part.stl
  • Cross t.stl
  • T-t, side part.stl
  • T-t.stl

Learn more about the formats
Last update 2024-11-05 at 15:26
Publication date 2024-08-04 at 13:05
Design number 2182229
DenStasis

DenStasis

Certified
Issue with this design? Report a problem.

9 comments

Add a comment

9 comments

LuminArt
LuminArt

The ts break when i introduce into the parts.

DenStasis
DenStasis

Hi, which one exactly? I'll double-check.

LuminArt
LuminArt

The smallest piece, i cant send you photo

  • 1 like
DenStasis
DenStasis

Please write the name of the STL file, thank you

LuminArt
LuminArt

Connecting element

DenStasis
DenStasis

Please email me with details about the issue and send a screenshot [email protected]
Elviraa
Elviraa

Have you heard of anybody else having difficulty getting files to load? Anything other than 15mm and 45 mm (side and normal wall but that's all) wont load no matter what. I've tried flashprint-5 and orca flashforge with no success.

DenStasis
DenStasis

I have sent you a message

DenStasis
DenStasis

Please email me, [email protected]
CappuccinoCake
CappuccinoCake

Hey, i bought your model, and after now checking my places where to put i discovered, that at one place I am not able to combine any of the pieces to get to the length. Would it be possible that you export some other lengths, so it would be able to reach most inner lengths? 20mm or 40mm maybe, and a 50?

  • 1 like
DenStasis
DenStasis

Hi, I have added wall lengths 20mm, 40mm, 50mm

  • 1 like
CappuccinoCake
CappuccinoCake

Oh, thats nice. Thanks for being so fast. Is it possible to get the inner ones (not side parts) also?

  • 1 like
DenStasis
DenStasis

That's odd; I couldn't it on the first try. Could you check if the necessary files are available now?

CappuccinoCake
CappuccinoCake

Yes, now they are available, thank you very much :)
tilman232-cults3d
tilman232-cults3d

Great design, really helped organize my drawers. Printed everything in PETG as I'm using them also for some kitchen drawers.
Do you also have some internal corner pieces available? That would allow me to use the space for some oddly shaped utensils way more effectively.

DenStasis
DenStasis

I apologize for the delayed response. Feel free to reach out to me at [email protected]; maybe we can come up with a solution
agerl
agerl

Great design, good idea. I would also really like 40mm or 45mm. I needed just under 500gr for an IKEA drawer. Parts are still being printed for 2 more. The only thing that is a bit annoying is that I printed the connectors in PLA, PLA+ and APLA, around 25% break during assembly. Only in PETG only 1% of the connectors break.

  • 2 likes
catlord
catlord

same here. all PLA breaks (print in draft mode 0.24 layer height. I'm trying in PETG right now.
I have done the 45mm height version with meshmixer.

  • 1 like
DenStasis
DenStasis

I apologize for the delayed response. Perhaps the incorrect orientation is the issue. Are you printing it on its side?
catlord
catlord

It Should have been a good idea to use metric system to save the pieces.
I'm starting the process to transform it to have 45mm height.

catlord
catlord

My mistake, the parts 30mm, 30mm side,60mm, 60mm side,105mm,105mm side are with a 1/10 scale.
ed1974
ed1974

what material did you use PLA, PETG?

  • 1 like
DenStasis
DenStasis

PLA

  • 1 like
ed1974
ed1974

thanks that's what i wanted to know

  • 1 like
ahmeddemiir
ahmeddemiir

can you share at a greater height?
Or is it also possible to share as a step file

DenStasis
DenStasis

If you mean the height of the walls, it's 30mm. Unfortunately, I can't export a STEP file; Blender3D doesn't allow that

ahmeddemiir
ahmeddemiir

Yes, will you also update to higher than 30 mm?

DenStasis
DenStasis

So far, there were no such plans. There's an option to simply use the scale modifier along the Z-axis in the slicer, but it might not work very wel

  • 1 like
catlord
catlord

I have made 45mm model with meshmixer
17laih1
17laih1

Amazing design, what is the height of the walls?

  • 1 like
DenStasis
DenStasis

Thank you, the wall height is 30 mm.

zimperator
zimperator

Like the design, are there any other wall heights planned/possible? E.g. 50mm or even 100mm?

  • 1 like
catlord
catlord

I have done 45mm height in meshmixer

Would you like to Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 4 people, therefore it is very simple to us to maintain the activity and create future developments. Here are 3 solutions accessible to all:

  • ADVERTISING: Disable your ad blocker.
  • DONATE: Make a donation via Ko-Fi 💜.
  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and ing on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not able to any investor or brand. Almost all of the site’s revenues are paid back to the platform’s makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.