PROSTHETIC PET SOLUTION COLLECTION

Prosthetic PET GEAR+
LIMB Bundle Collection
24/25
INNOVATIVE
DESIGN . DOMESTIC ARTIFICIAL
PET LIMBS For Tripod dog Cases &
Missing LIMB . FORELIMB side
Including Wrapping..pads,Sheens Inclusive MODEL (s) to give bipedal
Prosthetic with well Fitting Mods

If deformity is congenital
For Instance Pet Dog/Cat was born without the paw
And the direction of the curvature of the elbow is pulled to the right side.
That’s why the lower part is bended giving
Balance to leg concepts with more Infill wall, Equilibrium and more
Practical modifying

Tight pliable Shoulder Sheens Pad/Protection shoulder Wrap for Conformity..Concept of Prosthetic designs meant to provide temporal use for amputated animals as well as give balance to baby Pets with detachable section under to be wrapped around Shoulder area & Some Belts ing Under armpit so the Pet can wear Even
HomeMade,D.I.Y Custom Limb s.

*Police/Vigilant Pet Dog
*Temporal & Leisure
*Athletic small Pet
Variety Of Concepts Available In Bundle Zip File Containing Extra Assemblance Parts of
Prosthetic concepts that can also be Considered for PETS IN A SCI-FI FILM

AVERAGE SIZES OF MODELS :-
*8 TO 11 CM HEIGHT Long
*12 To 14cm. " "
*14 To 28cm. (Medium Average)
*28 to. 42 cm. ( Larger Size Limbs)

NOTE :
•Consider Resizing to scale of Choice
•Extended additive parts on the
• Models like ADDA concept Which is One Limb...Has thick wall infill does not need screws...but can be used for Casting.
•Lower Limb with Two sector MODELS>>
Concepts that can have their lower Limb Modified to desired Shoulder Fitting &
Conformity
•Are Model's with Thick Infill >>
May Require
•m6 x 12mm Bolt/Screw for smaller size pets
•m4 x 80mm Bolt/Screw for Bigger Pet species
•M8 x 60mm Bolt/Screw for Larger Pets
Or order Custom Bolt/Screws you may desire to customize the fastening Attachments of Sectors /
Replacable MODEL (s)

FOR HOME OUTDOOR OR SCI-FI AESTHETIC FASHION USE.

The preferable material should be
Strong &Thick.
*There's Model (s) with 2 sectors
& limbs Both Removable\Resizable:
May Require
•m6 - 0.6mm Thread Pitch x 12mm Bolt/Screw for smaller size pets
•m4 - 0.8mm x 80mm Bolt/Screw for Bigger Pets
•M8 - 0.9 x 60mm Bolt/Screw for Larger Pet LIMB MODEL (s)

•MODELS with ready set up Bolts Screws May be edited with Cube Shape for Replacement unto Screw Pitch Of Choice

Or order Custom Bolt/Screws to Customize the fastening Needed
• Elastromer rubber for the lower and upper part
•Some Lower Parts may require Springs Attachments with Professional Modification
•MODEL (s) with Retention ..Friction is require Compression Springs,
Minimal Scale Torsion springs or common
Helical Springs etc..

Well Placed & balanced on
Y axis with brim Adhesion or with s
-Smaller Full Pet Leg designs
•wither Wraps,Pad requires Durable
Material
-kept hygienically Dry & Clean for
Efficient use.
•can be printed as single print
,s
•Resin or FDM
{Credit to Dental Kinder}
C curve like Pet Paw Sci Fi design

Other 41cm
(7:4 Dimensional Ratio) :-
(As average Normal pet leg height )
Models:
• some printed with Laser Cutting
If Desired
• + welded/welding required
When
•their separate sectors welded with springs,keyholes,Extra pockets
Etc...
- Using strong Glue to attach GPS trackers ,Go Pro Cams and so on...

0.6mmNozzle for small scale designs
0.8mm for Larger & separate Sectors

40% - 80% Infill

(Depending on density of various Sections)

If other attachments have to be added like a Go.pro Camera...
Maracus for sound of Pet movements Below are Recommendations of items that can be found on Amazon :-

•Thickness Pre-Cut Foam Tape,Super-Sticky Black Strong Pads Rectangle Shape Waterproof for Walls
• https://www.amazon.com/dp/B0DP2B23NP/ref=sspa_mw_detail_3?ie=UTF8&psc=1&spc=MTo4MzIzOTY0MjM4MzE1MTEzOjE3NDE1MTAwNTc6c3BfcGhvbmVfZGV0YWlsOjMwMDY3MTY2MjAyMjIwMjo6Ojo&sp_csd=d2lkZ2V0TmFtZT1zcF9waG9uZV9kZXRhaWwp13NParams